Epoxy vs Urethane

In comparison to epoxy floors, urethane flooring products possess improved resistance to abuse and impact from dropped pots, steel components and utensils in industrial kitchens and food crops. They manage persistent scratching better than epoxy, acrylic and aggressive systems. They’re extremely advantageous in plant places where metal wheels are used, such as bakeries. Urethane mortar floors are utilized as water-proof flooring, providing a bathtub effect in regions of the plant requiring a water-proof floor. They’re non slip when wet, and give a permanent non slip texture, as a result of integral large, hard wearing aggregate, through the thickness of the flooring system. Cementitious urethane mortars possess a comparable modulus of elasticity and thermal coefficient of expansion to that of concrete. When applied over concrete, tile or brick, this also prevents delamination when the flooring is worried because of thermal problems. These food grade flooring materials resist heat escapes and repeated thermal cycling without breaking down. Furthermore, cool and humidity temperature tolerance allows for installation on cold, damp concrete surfaces, frequently found in operating plants. Have very little odor, because there are no VOC’s. Which implies that there’s no danger to open food products. Could be implemented alongside completely functional food processing areas, eliminating the need to shut an operation to resurface the ground. One pass installation free of primer coat demanded, implies that many flooring restoration projects can be finished over weekends, without a pricey manufacturing downtime. Additionally, has exceptional all around resistance to compounds utilized in food drink plants. Systems are typically trowelled, and are applied at to 3\/8 inch thickness, and provide a seamless matte finish. These trowel implemented urethane mortars have physical properties which are twice that of concrete. Self leveling slurry systems were initially developed for builders that weren’t able to set up the urethane mortar floors. These systems typically applied a 1\/8 to 3\/16 inch thickness. They give a heavy duty surface in places which require a high gloss, urethane or polyurethane concrete top coat, maximum cleanability, and high aesthetics. Applications consist of screeding, broadcasting with natural quartz aggregate, and top coating. They’re available with a novolac epoxy topcoat, which permits for setup in chemical storage areas, with concentrated spillages. These systems can also be finished with coloured quartz or vinyl chips. The original system, Ucrete HF, is a FDA type United States Department of Agriculture flooring, United States Department of Agriculture accepted, trowel implemented urethane, and is the original system. It’s withstood the test of time in the harshest environments. The trowelled inches system provides the highest degree of durability with a life span of greater than 10 years. The only drawback of urethane mortars, is they’re slightly less affordable upfront, than epoxy, nevertheless they provide long term performance and the maximum ROI.